Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF Enforce Codec Policy Configuration Mode Commands
▀ static-codec
▄ Command Line Interface Reference, StarOS Release 17
3108
static-codec
Creates a list of static codecs supported by the system.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Policy Configuration > CSCF Policy Rules
Configuration > Enforce Codec Policy Configuration
Configuration > Enforce Codec Policy Configuration
configure > context context_name > cscf policy { default | name policy_name } > service-
policy-rules > enforce-codec-policy
policy-rules > enforce-codec-policy
–or–
Exec > Global Configuration > Context Configuration > CSCF Policy Configuration > AoR Policy Rules Configuration
> CSCF Policy Rules Configuration > Enforce Codec Policy Configuration
> CSCF Policy Rules Configuration > Enforce Codec Policy Configuration
configure > context context_name > cscf policy { default | name policy_name } > aor-
policy-rules > aor aor_name > enforce-codec-policy
policy-rules > aor aor_name > enforce-codec-policy
Entering the above command sequences results in the following prompt:
[context_name]host_name(config-policy-enforce-code)#
Syntax
static-codec { audio payload_type | video payload_type }
default static-codec
no static-codec [ payload_type ]
default
Specifies that the default list of static codecs is added to the allowed codecs list.
The default static codec is 5: DVI4.
The default static codec is 5: DVI4.
no
Specifies that all static codecs are removed from the allowed codecs list. If a
payload_type
is specified,
then only the codec specified by the
payload_type
is removed.
audio payload_type | video payload_type
audio payload_type:
Specifies the audio codec added to the allowed codecs list.
payload_type
must
be an integer from 0 to 95. Default value is 5.
Valid static audio codecs:
Valid static audio codecs:
0: PCMU
7: LPC
14: MPA
21: unassigned
1: reserved 8: PCMA
15: G728
22: unassigned
2: reserved 9: G722
16: DVI4
23: unassigned