Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF Last Route Profile Criteria Configuration Mode Commands
▀ county-name
▄ Command Line Interface Reference, StarOS Release 17
3126
county-name
Configure county names and assign them Last Routing Option (LRO) numbers to be used by the CSCF last route
profile.
profile.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Last Route Profile Criteria Configuration
configure > context context_name > cscf last-route-profile name profile_name criteria {
county-name | round-robin }
county-name | round-robin }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-criteria_type-lro-profile)#
Syntax
county-name county_name lro-number value
[ no ] county-name county_name
county_name
Specifies the county name.
county_name
must be from 1 to 79 alpha and/or numeric characters in length.
lro-number
value
Specifies an existing LRO number.
value
can be a maximum of ten digits in length.
no county-name
county_name
Removes the specified county name.
Usage
Use this command to configure county names and assign them LRO numbers.
Important:
You may configure up to 100 county names.
Example
The following command creates a county name called
norfolk
and assigns it an LRO number of
8884384357
:
county-name norfolk lro-number 8884384357