Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF Service Configuration Mode Commands
timeout ▀
Command Line Interface Reference, StarOS Release 17 ▄
3321
timeout
Sets timeout values for CSCF and SIP transactions.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
timeout { hss-wait sec | map-slr-response sec | no-answer sec | policy-interface sec |
sip { 3gpp-d sec | 3gpp-t1 msec | 3gpp-t2 sec | 3gpp-t4 sec | c sec | d sec | idle-tcp-
connection msec [ cleanup-timer msec ] | invite-expiry sec | t1 msec | t2 sec | t4 sec }
}
sip { 3gpp-d sec | 3gpp-t1 msec | 3gpp-t2 sec | 3gpp-t4 sec | c sec | d sec | idle-tcp-
connection msec [ cleanup-timer msec ] | invite-expiry sec | t1 msec | t2 sec | t4 sec }
}
default timeout { hss-wait | map-slr-response | no-answer | policy-interface | sip {
3gpp-d | 3gpp-t1 | 3gpp-t2 | 3gpp-t4 | c | d | idle-tcp-connection | invite-expiry | t1 |
t2 | t4 } }
3gpp-d | 3gpp-t1 | 3gpp-t2 | 3gpp-t4 | c | d | idle-tcp-connection | invite-expiry | t1 |
t2 | t4 } }
default
Returns the command to the default settings. See keywords above for specific defaults.
hss-wait
sec
Default: 5
This timer is used by S-CSCF with HSS interface for timeout.
This timer is used by S-CSCF with HSS interface for timeout.
sec
must be an integer from 0 to 2147483646.
map-slr-response sec
Default: 15
This timer is used by the E-CSCF for MAP SLR response timeout.
This timer is used by the E-CSCF for MAP SLR response timeout.
sec
must be an integer from 15 to 30.
no-answer
sec
Default: 100
This timer is specially used for No-Answer Call Feature executed by S-CSCF. The timer will be started as
soon as 180 Ringing response is received and No-Answer call feature is enabled. The value of this timer
should be always less than INVITE Timeout used by DC-SIP.
This timer is specially used for No-Answer Call Feature executed by S-CSCF. The timer will be started as
soon as 180 Ringing response is received and No-Answer call feature is enabled. The value of this timer
should be always less than INVITE Timeout used by DC-SIP.
sec
must be an integer from 0 to 2147483646.