Cisco Cisco Packet Data Interworking Function (PDIF)
EDR Format Configuration Mode Commands
▀ rule-variable
▄ Command Line Interface Reference, StarOS Release 17
3614
rule-variable
This command allows you to specify fields and their order in EDRs.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > EDR Format Configuration
active-charging service service_name > edr-format format_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-acs-edr)#
Syntax
rule-variable rule_variable priority priority [ in-quotes ]
no rule-variable rule_variable [ priority priority ]
no
If previously configured, removes the specified rule variable configuration.
rule_variable
Specifies the rule variable for the EDR format.
rule_variable
must be one of the following options:
bearer 3gpp
: 3GPP bearer-related fields:
charging-id
: Charging ID of the bearer flow
imei
: IMEI or IMEISV (depending on the case) associated with the bearer flow. Only
available in StarOS 8.1 and later releases.
imsi
: Specific Mobile Station Identification number.
rat-type
: RAT type associated with the bearer flow. Only available in StarOS 8.1 and later
releases.
sgsn-address
: SGSN associated with the bearer flow. Only available in StarOS 8.1 and later
releases. For MIPv6 calls, sgsn-address field is populated with HSGW address.
user-location-information
: User location information associated with the bearer flow.
Only available in StarOS 8.1 and later releases.
bearer 3gpp2
: 3GPP2 bearer-related fields:
always-on
: 3GPP2 always on indicator
bsid
: 3GPP2 BSID
esn
: 3GPP2 ESN
ip-qos
: 3GPP2 IP QoS