Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (A-C)
▀ clock set
▄ Command Line Interface Reference, StarOS Release 17
3988
clock set
Sets the system time.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clock set date_time
date_time
Specifies the date and time to set the system clock in the format YYYY:MM:DD:HH:mm or
YYYY:MM:DD:HH:mm:ss. Where:
YYYY:MM:DD:HH:mm:ss. Where:
YYYY = 4-digit year
MM = 2-digit month in the range 01 through 12
DD = 2-digit day in the range 01 through 31
HH = 2-digit hour in the range 00 through 23
mm = 2-digit minute in the range 00 through 59
ss = 2-digit second in the range 00 through 59
Usage
Set the clock to adjust the system clock for such things as timing drift, day-light savings adjustment, etc. New
settings are immediately applied to all CPUs in the system.
settings are immediately applied to all CPUs in the system.
Important:
This command should only be used if there is no NTP server enabled for any context. If NTP is
running on the system, this command returns a failure.
Example
The following commands set the system clock where one sets the exact second as well.
clock set 2011:08:05:02:30
clock set 2011:08:05:02:31:30