Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Charging Action Configuration Mode Commands
▀ pco-custom1
▄ Command Line Interface Reference, StarOS Release 17
420
pco-custom1
This command configures the Protocol Configuration Options (PCO) value that will be sent to all UEs, and relates to the
PCO for UE Notification feature.
PCO for UE Notification feature.
Product
P-GW
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
pco-custom1 custom1_value
{ no | default } pco-custom1
default
Configures custom1 with the default setting.
Default: 0
Default: 0
no
If previously configured, resets the pco-custom1 value to the default setting.
custom1_value
Specifies the PCO custom1 value.
custom1_value
must be an integer from 0 through 255.
Usage
Use this command to configure the PCO custom1 value to be sent to the MS GTP messages. To enable or
disable sending customized PCO options, use the
disable sending customized PCO options, use the
pco-options
command in the APN Configuration Mode.
Example
The following command configures PCO custom1 value to 5:
pco-custom1 5