Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (A-C)
show alcap statistics ▀
Command Line Interface Reference, StarOS Release 17 ▄
4351
show alcap statistics
Displays the session statistics related to Access Link Control Application Part (ALCAP) protocol sessions associated
with a Home-NodeB Gateway (HNB-GW) service instance configured and running on a system.
with a Home-NodeB Gateway (HNB-GW) service instance configured and running on a system.
Product
HNB-GW
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show alcap statistics [ alcap-service alcap_svc_name [ aal2-node aal2_node_name [ aal2-
path aal2_path_id ] ] ] [ verbose ] [ | { grep grep_options | more } ]
path aal2_path_id ] ] ] [ verbose ] [ | { grep grep_options | more } ]
name alcap_svc_name
Specifies the name of the ALCAP service for which statistics are to be displayed.
aal2-node aal2-node
Specifies the name of the ATM Adaptation Layer 2 (AAL2) node for which ALCAP service related statistics
will be displayed.
will be displayed.
aal2-path aal2_path_id
Specifies the identity number of the AAL2 path on a specific ATM Adaptation Layer 2 (AAL2) node for
which ALCAP service statistics counters will be displayed.
which ALCAP service statistics counters will be displayed.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of the
the output of this command will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section in Command Line Interface Overview chapter of the Command Line Interface Reference.
Usage
This command is used to display the sessions statistics and counters for ALCAP service.
Example
The following command displays the service session statistics counters for ALCAP service named as
alcap_hnb_svc1
:
show alcap counters alcap-service alcap_hnb_svc1
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.