Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (A-C)
show asnpc-service session counters ▀
Command Line Interface Reference, StarOS Release 17 ▄
4373
show asnpc-service session counters
Displays session counters for Access Service Network Paging Controller (ASN PC) service sessions.
Product
ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show asngw-service session counters [ all | callid call_id | msid msid_number | peer-
address ipv4_address | verbose ] ] [ | { grep grep_options | more } ]
address ipv4_address | verbose ] ] [ | { grep grep_options | more } ]
all
Displays all available counters for all ASN PC service sessions.
callid call_id
Displays available information for the call identification number specified as an 8-digit hexadecimal number.
msid msid_number
Displays available information for the specific mobile station identification (MSID) number.
peer-address ipv4_address
Specifies the IP address of an IP peer in IPv4 dotted-decimal notation.
verbose
Indicates the output should provide as much information as possible. If this option is not specified then the
output will be the standard level which is the concise mode.
output will be the standard level which is the concise mode.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view the counters of an ASN PC session.
Example
The following command displays the counters for ASN PC service sessions in verbose mode.