Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (H-L)
show ipsg statistics ▀
Command Line Interface Reference, StarOS Release 17 ▄
4653
show ipsg statistics
Displays IP Services Gateway (IPSG) service statistics.
Product
eWAG
IPSG
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ipsg statistics [ name ipsg_service_name | peer-address ipv4_address ] [ | { grep
grep_options | more } ]
grep_options | more } ]
name ipsg_service_name
Displays cumulative statistics of all IPSG sessions processed by the specified service since the last system
restart or clear command.
restart or clear command.
ipsg_service_name
must be the name of an IPSG service, and must be an alphanumeric string of 1
through 63 characters.
peer-address ipv4_address
Displays cumulative statistics of all IPSG sessions associated with the specified IP address of the device
sending the RADIUS accounting messages. The statistics displayed are from the last system restart or clear
command.
sending the RADIUS accounting messages. The statistics displayed are from the last system restart or clear
command.
ipv4_address
must be specified in IPv4 dotted-decimal notation.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view IPSG service statistics.
Example
The following command displays cumulative IPSG session statistics on the system:
show ipsg statistics
The following command displays the cumulative IPSG session statistics for an IPSG service named
ipsg1
: