Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (H-L)
▀ show logical-port utilization table
▄ Command Line Interface Reference, StarOS Release 17
4698
show logical-port utilization table
Displays logical port (VLAN and NPU) utilization for a specified interface port.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show logical port utilization table slot/port [vlan { 5-minute | hourly }] [ | { grep
grep_options | more } ]
grep_options | more } ]
slot/port
Specifies the port for which logical-port statistics will be displayed. The slot and port must refer to an
installed card and port.
installed card and port.
vlan { 5-minute | hourly }
Displays only active VLAN information for the specified collection interval.
5-minute
: Displays 5-minute utilization intervals for the past 24 hours.
hourly
: Displays hourly utilization intervals for the past 24 hours.
| { grep
grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
View logical port (VLAN) statistics for 5-minute intervals on port 17/1.
Example
show logical-port utilization table 17/1 vlan 5-minute