Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (Q-S)
show rohc counters ▀
Command Line Interface Reference, StarOS Release 17 ▄
4829
show rohc counters
Displays RObust Header Compression (ROHC) counters for all active calls.
Product
PDSN
HSGW
ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show rohc counters [ all | callid call_id | imsi imsi_num | ip-address ip_addr | msid
msid_num | username user_name ] [ | { grep grep_options | more } ]
msid_num | username user_name ] [ | { grep grep_options | more } ]
all
Displays all information.
callid call_id
Displays the information only for the call ID specified as a 4-byte hexadecimal number.
imsi imsi_num
Displays information for the specified IMSI (International Mobile Subscriber Identity). The IMSI is an up to
15-digit field which identifies the subscriber’s home country and carrier: 3 digits of Mobile Country Code
(MCC), 2 or 3 digits of Mobile Network Code (MNC), followed by the Mobile Subscriber Identification
Number MSIN. Example: 123-45-678910234. May also be entered as 12345678910234.
15-digit field which identifies the subscriber’s home country and carrier: 3 digits of Mobile Country Code
(MCC), 2 or 3 digits of Mobile Network Code (MNC), followed by the Mobile Subscriber Identification
Number MSIN. Example: 123-45-678910234. May also be entered as 12345678910234.
ip-address ip_addr
Displays information only for the mobile subscriber IP address specified in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
colon-separated-hexadecimal notation.
msid msid_num
Displays information only for a mobile subscriber ID from 7 to 16 digits for an IMSI, MIN, or RMI.
username user_name
Displays radio-packet (R-P) interface information only for a specified username.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
the output will be sent.