Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (Q-S)
▀ show sgtp-service
▄ Command Line Interface Reference, StarOS Release 17
4886
show sgtp-service
Displays information about the configured GPRS Tunnelling Protocol (SGTP) services in the current context, including
GTP-C and GTP-U operational configuration.
GTP-C and GTP-U operational configuration.
Product
SGSN
PDG/TTG
MME
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show sgtp-service all [ gtpu-table ] |{ ggsn-table [ smgr-instancesmgr_instance ] | mbms-
bearers | name srvc_name [ gtpu-table ] | }sgsn-table
bearers | name srvc_name [ gtpu-table ] | }sgsn-table
all [ gtpu-table ]
Displays configuration information for all of the SGTP services defined for the current context.
gtpu-table
: Limits the output to GTPU information for all SGTP services.
ggsn-table [ smgr-instance srvc_name ]
Displays GGSN information configured for the SGTP service(s) in the current context.
smgr-instance srvc_name
enter an integer from 1 through 384 to limit the GGSN output to information
for a specific session manager.
mbms-bearers
This keyword is specific to the SGSN and is not yet supported.
name srvc_name [ gtpu-table ]
Displays information for the specified SGTP service in the current context.
srvc_name
must be an
alphanumeric string of 1 through 63 characters that identifies a configured SGTP service.
gtpu-table
: Limits the output to GTPU information for a specific SGTP service.
sgsn-table
Displays SGSN information configured for the SGTP service(s) in the current context.
Usage
Use this command to control the display of SGTP services information.
Example