Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (Q-S)
show support details ▀
Command Line Interface Reference, StarOS Release 17 ▄
4975
show support details
Displays a comprehensive list of system information that is useful for troubleshooting purposes. In most cases, the
output of this command is requested by the Technical Assistance Center (TAC).
output of this command is requested by the Technical Assistance Center (TAC).
Important:
To improve output performance when executing the show cli history command, this command
displays the config command but not the individual CLI commands within the config file.
Product
All
Privilege
All
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show support details [ to file url] [ compress ] [ | { grep grep_options | more } ]
to file url
Specifies the location where a .tar file with the support detail information should be created.
url
may refer to
a local or a remote file and must be entered using the following format:
For the ASR 5000:
For the ASR 5000:
[ file: ] { /flash | /pcmcia1 | /hd } [ /directory ] /file_name [
compress ]
compress ]
tftp:// { host [ :port# ] } [ /directory ] /file_name
[ ftp: | sftp: ] // [ username[ :password ] @ ] { host } [ :port# ] [
/directory ] /file_name
/directory ] /file_name
For the ASR 5500:
[ file: ] { /flash | /usb1 | /hd } [ /directory ] /file_name [ compress ]
tftp:// { host [ :port# ] } [ /directory ] /file_name
[ ftp: | sftp: ] // [ username[ :password ] @ ] { host } [ :port# ] [
/directory ] /file_name
/directory ] /file_name
Important:
Do not use the following characters when entering a string for the field names below: “/” (forward
slash), “:” (colon) or “@” (at sign).
directory
is the directory name.