Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Configuration Mode Commands
h323 tpkt ▀
Command Line Interface Reference, StarOS Release 17 ▄
503
h323 tpkt
This command allows you to configure the maximum size of Transport Protocol Data Unit Packets (TPKT) that the
H.323 Application Layer Gateway (ALG) can handle.
H.323 Application Layer Gateway (ALG) can handle.
Product
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs)#
Syntax
h323 tpkt max_tpkt_size
default h323 tpkt
default
Configures this command with its default setting.
Default: 2048 bytes
Default: 2048 bytes
max_tpkt_size
Specifies the maximum TPKT size, in bytes.
max_tpkt_size
must be an integer from 4 through 4096.
Usage
Use this command to configure the maximum packet size for the H.323 ALG.
Example
The following command configures a maximum TPKT packet size of
100
bytes:
h323 tpkt 100