Cisco Cisco Packet Data Interworking Function (PDIF)
GGSN Service Configuration Mode Commands
associate gtpu-service ▀
Command Line Interface Reference, StarOS Release 17 ▄
5163
associate gtpu-service
This command associates a previously configured GTP-U service to bind the GGSN service with a peer. A GTP-U
service must be configured in Context Configuration mode before using this configuration.
service must be configured in Context Configuration mode before using this configuration.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
associate gtpu-service svc_name
noassociate gtpu-service
no
Removes the associated GTP-U service from this GGSN service configuration.
svc_name
Identifies the name of the GTP-U service preconfigured in Context Configuration mode to associate with a
GGSN service.
GGSN service.
svc_name
is an alphanumeric string from 1 through 63 characters.
Usage
Use this command to configure GTP-U data plan between GGSN service and peer node. The service defined
for GTP-U can be configured in Context configuration mode.
for GTP-U can be configured in Context configuration mode.
Example
Following command associates GTP-U service named
gtpu-hnb1
with specific GGSN service.
associate gtpu-service gtpu-hnb1