Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
▀ port bits
▄ Command Line Interface Reference, StarOS Release 17
5426
port bits
Enters the Building Integrated Timing Supply (BITS) port configuration mode by identifying the BITS port on the
active or standby SPIO.
active or standby SPIO.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
port bits slot/port
bits
Identifies the BITS port.
slot/port
slot:
Identifies the chassis slot holding the SPIO. The slot ID can be either 24 (active SPIO) or 25 (standby
SPIO).
port:
Identifies the BITS port on the SPIO. The port ID number must be 4.
Usage
Change the current configuration mode to BITS port configuration mode.
Important:
This command is not supported on all platforms.
Example
The following enters the BITS port configuration mode for the active SPIO:
port bits 24/4