Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
▀ require active-charging
▄ Command Line Interface Reference, StarOS Release 17
5452
require active-charging
This command enables/disables Active Charging Service (ACS) with or without the Category-based Content Filtering
application.
application.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
require active-charging [ isolated-mode ] [ content-filtering category [ static-and-
dynamic ] ] [ optimized-mode ]
dynamic ] ] [ optimized-mode ]
no require active-charging
no
Disables ACS on the system.
isolated-mode
Enables ACS and separates ACS-related resources from other sub-system resource sharing.
Important:
In 8.1 and later releases, this keyword is not supported.
optimized-mode
Enables ACS in Optimized mode, wherein ACS functionality is managed by SessMgrs.
Important:
In 8.0 and earlier releases and in 9.0 and later releases, this keyword is not supported.
Important:
In Release 8.1, ACS must be configured in the Optimized mode.
Important:
In Release 8.1, if the active-charging mode is changed from the default (non-optimized) mode to the
Optimized mode, or vice-versa, the system must be rebooted for the change to take effect.
Important:
In Release 8.3, this keyword is obsolete. With or without this keyword ACS is always enabled in the
Optimized mode.