Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
snmp heartbeat ▀
Command Line Interface Reference, StarOS Release 17 ▄
5483
snmp heartbeat
Enables the sending of periodic “heartbeat” notifications (traps).
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
snmp heartbeat { interval minutes | second-interval seconds }
[ default | no ] snmp heartbeat
default
Resets the SNMP heartbeat to 60 minutes.
no
Disables the feature.
interval
minutes
Specifies the interval time in minutes between notificationsas an integer from 1 through 1440. Default: 60
second-interval
seconds
Default: 30
Specifies the interval time in seconds between notificationsas an integer from 10 through 50.
Specifies the interval time in seconds between notificationsas an integer from 10 through 50.
Usage
Use this command to enable the sending of a heartbeat notification periodically to confirm a system is up and
communicating.
communicating.
Example
The following command sets the SNMP heartbeat notification interval to 2 hours, 15 minutes.
snmp heartbeat interval 135