Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (threshold poll commands O - Z)
▀ threshold poll total-henbgw-henb-sessions
▄ Command Line Interface Reference, StarOS Release 17
5858
threshold poll total-henbgw-henb-sessions
Configures the polling interval on how frequently the thresholds are polled for total HeNB-GW HeNB sessions.
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold poll total-henbgw-henb-sessions interval time
default threshold poll total-henbgw-henb-sessions interval
default
Restores the threshold polling interval value to its default value of 900 seconds.
interval
time
Default: 900 seconds
Specifies the amount of time (in seconds) that comprises the polling interval.
Specifies the amount of time (in seconds) that comprises the polling interval.
time
must be an integer from 30 through 60000.
Usage
This command sets the time period over which to monitor the specified value for threshold crossing.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a
polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
threshold model
and
threshold monitoring
commands for additional information on the
system’s support for thresholding.
Important:
To enable SNMP trap for threshold monitoring of this threshold use
snmp trap enable
ThreshHeNBGWHenbSessions
command in this mode.
Example
The following command configures the polling interval to
600
seconds (10 minutes):
threshold poll total-henbgw-henb-sessions interval 600