Cisco Cisco Packet Data Interworking Function (PDIF)
GPRS Service Configuration Mode Commands
▀ admin-disconnect-behavior
▄ Command Line Interface Reference, StarOS Release 17
5950
admin-disconnect-behavior
This command defines some of the actions the SGSN will take during an Admin-Disconnect procedure.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
admin-disconnect-behavior { clear-subscription | detach-type { reattach-not-required |
reattach-required } }
reattach-required } }
default admin-disconnect-behavior { clear-subscription | detach-type }
clear-subscription
Including this keyword in the configuration instructs the SGSN to clear subscriber contexts and the
subscription data database whenever the
subscription data database whenever the
clear subscribers all
command is issued (from the Exec
mode) for attached subscribers. As well, the SGSN will issue an appropriate Map-Purge-MS-Req to the HLR
if needed.
Default: disabled
if needed.
Default: disabled
detach-type
Including this keyword defines which type of detach instruction to include in the Detach-Request message
during an Admin-Disconnect procedure. One of the following options must be included when this command
is entered:
during an Admin-Disconnect procedure. One of the following options must be included when this command
is entered:
reattach-not-required
reattach-required
Default: reattach-required
default
Including the
default
keyword in the command, instructs the SGSN to use the default value for the
specified parameter.
no
Returns the SGSN to the default where this clear function is disabled