Cisco Cisco Packet Data Interworking Function (PDIF)
GRE Tunnel Interface Configuration Mode Commands
▀ tos
▄ Command Line Interface Reference, StarOS Release 17
6014
tos
This command configures the parameters/action for the type of Service (ToS) parameter in the IP tunnel transport
protocol header.
protocol header.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Tunnel Interface Configuration > GRE Tunnel Interface
Configuration
Configuration
configure > context context_name > interface interface_name tunnel > tunnel-mode gre
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-tunnel-mode)#
Syntax
tos { value [ af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42
| af43 | be | ef | lower-bits tos_value] | copy }
| af43 | be | ef | lower-bits tos_value] | copy }
[ default | no ] tos
default
Sets the IP TOS to lower bits value of 0.
value [ tos_value ]
Default:
af11
Specifies the IP QoS DSCP per-hop behavior to be marked on the outer header of signalling packets
originating from the Access Gateway. This is a standards-based feature (RFC 2597). The following
forwarding types are supported:
originating from the Access Gateway. This is a standards-based feature (RFC 2597). The following
forwarding types are supported:
af11
: Assured Forwarding 11 per-hop behavior
af12
: Assured Forwarding 12 per-hop behavior
af13
: Assured Forwarding 13 per-hop behavior
af21
: Assured Forwarding 21 per-hop behavior
af22
: Assured Forwarding 22 per-hop behavior
af23
: Assured Forwarding 23 per-hop behavior
af31
: Assured Forwarding 31 per-hop behavior
af32
: Assured Forwarding 32 per-hop behavior
af33
: Assured Forwarding 33 per-hop behavior
af41
: Assured Forwarding 41 per-hop behavior
af42
: Assured Forwarding 42 per-hop behavior
af43
: Assured Forwarding 43 per-hop behavior