Cisco Cisco Packet Data Interworking Function (PDIF)
GTPP Server Group Configuration Mode Commands
gtpp storage-server ▀
Command Line Interface Reference, StarOS Release 17 ▄
6103
gtpp storage-server
Configures information for the GTPP back-up storage server.
Product
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
[ no ] gtpp storage-server ip_address port port_num
no
Removes a previously configured back-up storage server.
ip_address
The IP address of the back-up storage server expressed in IPv4 dotted-decimal notation.
port
port_num
Specifies the UDP port number over which the GGSN communicates with the back-up storage server.
Default: 3386
Default: 3386
Usage
This command identifies the connection to the GSS. One backup storage server can be configured per GTPP
group.
group.
Example
The following command configures a GSS with an IP address of 192.168.1.2:
gtpp storage-server 192.168.1.2