Cisco Cisco Packet Data Interworking Function (PDIF)
GTPP Server Group Configuration Mode Commands
gtpp storage-server mode ▀
Command Line Interface Reference, StarOS Release 17 ▄
6109
gtpp storage-server mode
Configures the storage mode (local, remote or streaming for CDRs) to be used. Local storage mode is available with
ASR 5000 platforms only.
ASR 5000 platforms only.
Product
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
gtpp storage-server mode { local | remote | streaming [ parallel ] }
default gtpp storage-server mode
default
Returns the GTPP group configuration to the default “remote” value for the GTPP storage server mode.
local
Specifies the use of the hard disk for storing CDRs. Default: Disabled
Important:
This option is available with ASR 5000 platforms only.
remote
Specifies the use of an external server for storing CDRs. This is the default value.
Important:
When the external server is down, the Session Managers will start buffering up to a maximum of
26400 CDRs or a total of 120 MB worth of CDRs, whichever limit reaches first. The maximum CDR limit specified is
per the session manager. The chassis level limit varies depending on the number of session manager instances and
number of active cards.
per the session manager. The chassis level limit varies depending on the number of session manager instances and
number of active cards.