Cisco Cisco Packet Data Interworking Function (PDIF)
GTPP Server Group Configuration Mode Commands
gtpp timeout ▀
Command Line Interface Reference, StarOS Release 17 ▄
6115
gtpp timeout
Configures the amount of time that must pass with no response before the system re-attempts to communicate with the
CGF.
CGF.
Product
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
[ default ] gtpp timeout time
default
Resets the systems GTPP timeout value to 20 seconds.
time
Specifies the maximum amount of time (in seconds) the system waits for a response from the CGF before
assuming the packet is lost.
assuming the packet is lost.
time
is an integer from 1 through 60. Default: 20
Usage
This command works in conjunction with the
gtpp max-retries
command to establish a limit on the
number of times that communication with a CGF is attempted before a failure is logged.
This parameter specifies the time between retries.
This parameter specifies the time between retries.
Example
The following command configures a retry timeout of 30 seconds:
gtpp timeout 30