Cisco Cisco Packet Data Interworking Function (PDIF)
HA Service Configuration Mode Commands
▀ ip local-port
▄ Command Line Interface Reference, StarOS Release 17
6176
ip local-port
Configures the local User Datagram Protocol (UDP) port for the Pi interface’s IP socket on which to listen for Mobile
IP Registration messages.
IP Registration messages.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ha-service)#
Syntax
ip local-port number
default ip local-port
default
Sets or restores the default value assigned for the IP local port.
number
Specifies the UDP port number.
number
is an integer from 1 through 65535. Default is 434.
Usage
Specify the UDP port that should be used for communications between the FA service and the HA.
Example
The following command specifies a UDP port of
3950
for the HA service to use to communicate with the
HA on the Pi interface:
ip local-port 3950