Cisco Cisco Packet Data Interworking Function (PDIF)
HA Service Configuration Mode Commands
▀ threshold dereg-reply-error
▄ Command Line Interface Reference, StarOS Release 17
6196
threshold dereg-reply-error
Sets an alarm or alert based on the number of de-registration reply errors per HA service.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ha-service)#
Syntax
threshold dereg-reply-error high_thresh [ clear low_thresh ]
no threshold dereg-reply-error
no
Deletes the alert or alarm.
high_thresh
Default: 0
Specifies the high threshold number of de-registration reply errors that must be met or exceeded within the
polling interval to generate an alert or alarm. It can be configured to an integer from 0 through 100000.
Specifies the high threshold number of de-registration reply errors that must be met or exceeded within the
polling interval to generate an alert or alarm. It can be configured to an integer from 0 through 100000.
clear
low_thresh
Default: 0
The low threshold number of de-registration reply errors that must be met or exceeded within the polling
interval to clear an alert or alarm. It can be configured to an integer from 0 through 100000.
The low threshold number of de-registration reply errors that must be met or exceeded within the polling
interval to clear an alert or alarm. It can be configured to an integer from 0 through 100000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Use this command to set an alert or an alarm when the number of de-registration reply errors is equal to or
greater than a specified number of calls per second.
Alerts or alarms are triggered for the number of de-registration reply errors on the following rules:
greater than a specified number of calls per second.
Alerts or alarms are triggered for the number of de-registration reply errors on the following rules:
Enter condition: Actual number of de-registration reply errors > High Threshold
Clear condition: Actual number of de-registration reply errors < Low Threshold
Example