Cisco Cisco Packet Data Interworking Function (PDIF)
HeNB-GW Network Service Configuration Mode Commands
▀ s1ap-retransmission-timeout
▄ Command Line Interface Reference, StarOS Release 17
6252
s1ap-retransmission-timeout
This command configures the timeout interval to support Node Level S1AP retransmissions if there in no response
received from the peer (MME).
received from the peer (MME).
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HeNBGW-Network Service Configuration
configure > context
context_name
> henbgw-network-service
service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-henbgw-network-service)#
Syntax
s1ap-retransmission-timeout number_of_secs
default s1ap-retransmission-timeout
default
Configures the default S1AP retransmission timeout for this HeNB-GW Network service configuration.
Default retransmission timeout is 60 seconds.
Default retransmission timeout is 60 seconds.
number_of_secs
Identifies the number seconds as the S1AP retransmission timeout to be configured. This number must be
entered as an integer between 1 and 600.
entered as an integer between 1 and 600.
Usage
Use this command to configure the timeout interval to support Node Level S1ap retransmissions for this
HeNB-GW Network service.
HeNB-GW Network service.
Example
Following command configures 100 as the S1AP retransmission timeout on a specific HeNB-GW Network
service.
service.
s1ap-retransmission-timeout 100