Cisco Cisco Packet Data Interworking Function (PDIF)
HSGW Service Configuration Mode Commands
ip ▀
Command Line Interface Reference, StarOS Release 17 ▄
6271
ip
Enables the use of Robust Header Compression (RoHC) and enters the HSGW Service ROHC Configuration Mode
where RoHC parameters are configured for the service.
where RoHC parameters are configured for the service.
Configures the local User Datagram Protocol (UDP) port for the A10/A11 interface IP socket.
Sets the parameters for IP source validation. Source validation is useful if packet spoofing is suspected or for verifying
packet routing and labeling within the network. Source validation requires the source address of received packets to
match the IP address assigned to the subscriber (either statically or dynamically) during the session.
packet routing and labeling within the network. Source validation requires the source address of received packets to
match the IP address assigned to the subscriber (either statically or dynamically) during the session.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
ip { header-compression rohc | local-port number | source-violation { clear-on-valid-
packet | drop-limit num | period secs | reneg-limit num } }
packet | drop-limit num | period secs | reneg-limit num } }
default ip { header-compression rohc | local-port | source-violation { drop-limit |
period | reneg-limit } }
period | reneg-limit } }
no ip { header-compression rohc | source-violation clear-on-valid-packet }
default
Resets the keyword to its default value.
no
header-compression rohc
: Removes the RoHC configuration from this service.
ip source-violation clear-on-valid-packet
: Disables the ability of the service to reset the reneg-
limit and drop-limit counters after receipt of a properly addressed packet.
header-compression rohc
Specifies that Robust Header Compression will be applied to sessions using this service and enters the
HSGW Service RoHC Configuration Mode where RoHC parameters are configured.
HSGW Service RoHC Configuration Mode where RoHC parameters are configured.
local-port
number
Specifies the UDP port number as an integer from 1 through 65535. Default: 699