Cisco Cisco Packet Data Interworking Function (PDIF)
HSGW Service Configuration Mode Commands
▀ plmn id
▄ Command Line Interface Reference, StarOS Release 17
6278
plmn id
Configures Public Land Mobile Network identifiers used to determine if a mobile station is visiting, roaming or belongs
to this network.
to this network.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
plmn id mcc number mnc number
mcc number
mnc number
mcc
number
: Specifies the mobile country code (MCC) portion of the PLMN identifier as an integer fromn
100 through 999.
mnc
number
: Specifies the mobile network code (MNC) portion of the PLMN identifier as a 2- or 3-digit
integer from 00 through 999.
Usage
The PLMN identifier is used to aid the HSGW service in the determination of whether or not a mobile station
is visiting, roaming, or home. Multiple P-GW services can be configured with the same PLMN identifier. Up
to five PLMN IDs can be configured for each P-GW Service. The configured IDs are used in Diameter-EAP-
Request messages (as a Visited-Network-Identifier AVP).
is visiting, roaming, or home. Multiple P-GW services can be configured with the same PLMN identifier. Up
to five PLMN IDs can be configured for each P-GW Service. The configured IDs are used in Diameter-EAP-
Request messages (as a Visited-Network-Identifier AVP).
Example
The following command configures the PLMN identifier with an MCC of
462
and MNC of
2
:
plmn id mcc 462 mnc 02