Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-GW Global Configuration Mode Commands
▀ access-control-db
▄ Command Line Interface Reference, StarOS Release 17
6338
access-control-db
Configures the access control database parameters in HNB-GW Global configuration mode to control HNB and UE
access to the HNB-GW node.
access to the HNB-GW node.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-GW Global Configuration
configure > hnbgw-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnggw-global)#
Syntax
access-control-db imsi-purge-timeout { immediate | dur }
default access-control-db imsi-purge-timeout
default
Sets the default value to HNB-UE access control database on a chassis for HNB-GW Global configuration
instance.
The default timeout duration for purging of the IMSI White List from the HNB-GW Access Control database
is 24 hours. The HNB-GW service waits for 24 hours after all referenced HNBs have de-registered before
purging the records.
instance.
The default timeout duration for purging of the IMSI White List from the HNB-GW Access Control database
is 24 hours. The HNB-GW service waits for 24 hours after all referenced HNBs have de-registered before
purging the records.
immediate
Sets the HNB-GW Global configuration instance to purge the HNB-UE access control database immediately
after all referenced HNBs have de-registered.
after all referenced HNBs have de-registered.
imsi-purge-timeout dur
Sets the timeout duration (in minutes) for the access control database to wait before purging the IMSI values
received as a White List from HMS/BAC.
After all HNBs have de-registered, the Access Control database on HNB-GW maintains the IMSI White List
received from HMS/BAC during HNB registration procedure for the configured durations before purging the
list.
received as a White List from HMS/BAC.
After all HNBs have de-registered, the Access Control database on HNB-GW maintains the IMSI White List
received from HMS/BAC during HNB registration procedure for the configured durations before purging the
list.
dur
is an integer from 1 through 1440.
Usage
Use this command to configure the HNB-UE access control database parameters on a chassis for HNB-GW
Global configuration instance.
This command sets the timeout duration to maintain the IMSI White List received from HMS/BAC during
HNB registration procedure in HNB-GW Global configuration instance for the configured
Global configuration instance.
This command sets the timeout duration to maintain the IMSI White List received from HMS/BAC during
HNB registration procedure in HNB-GW Global configuration instance for the configured
dur
in minutes
after de-registration of all referenced HNBs from HNB-GW node and then purge the database.