Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-PS Network Configuration Mode Commands
▀ map idnns range
▄ Command Line Interface Reference, StarOS Release 17
6418
map idnns range
Configures the mapping of an Intra-Domain NAS Node Selector (IDNNS) IE received from UE in an RUA connect
message towards HNB-GW. This is an important configuration for PS network resource sharing over an Iu-Flex
interface.
message towards HNB-GW. This is an important configuration for PS network resource sharing over an Iu-Flex
interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-PS Network Configuration
configure > ps-network ps_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ps-network-instance_id)#
Syntax
map idnns range idnns_start to idnns_end point-code sgsn_point_code [backup point-code
bkup_sgsn_point_code]
bkup_sgsn_point_code]
no map idnns range idnns_start to idnns_end
no
Removes the entries of mapping of range of IDNNS received from UE with particular SGSN point code.
range
idnns_start
to
idnns_end
Specifies the range of IDNNSs received from UE to map with particular SGSN point codes during the initial
PS core network node selection.
PS core network node selection.
idnns_start
is an integer from 0 through 1023 that should be less than
idnns_end
.
idnns_end
is an integer from 0 through 1023 that should be more than
idnns_start
.
The command can be entered more than once to map multiple IDNNS ranges to the same SGSN. However,
overlapping and mapping of the same range to different SGSN point codes is not allowed.
overlapping and mapping of the same range to different SGSN point codes is not allowed.
point-code
sgsn_point_code
Specifies the SS7 address of the SGSN in the PS network.
sgsn_point_code
is ann SS7 point code in dotted-decimal ###.###.### or 8-digit decimal ########
format.
backup point-code
bkup_sgsn_point_code
Specifies the SS7 address of the SGSN to be used as the backup in the PS network.
bkup_sgsn_point_code
is an SS7 point code in dotted-decimal ###.###.### or 8-digit decimal ########
format.