Cisco Cisco Packet Data Interworking Function (PDIF)
Command Line Interface Reference, StarOS Release 17 ▄
6481
Chapter 175
IMEI Profile Configuration Mode
The IMEI profile configuration mode defines a set of parameters controlling the SGSN behavior when a Request is
received from a device in the specified IMEI (International Mobile Equipment Identity) range. An IMEI profile is a key
element in the Operator Policy feature and an IMEI profile is not used or valid unless it is associated with an IMEI
range and this association is specified in an operator policy (see the Operator Policy Configuration Mode Commands
chapter elsewhere in the Command Line Interface Reference).
received from a device in the specified IMEI (International Mobile Equipment Identity) range. An IMEI profile is a key
element in the Operator Policy feature and an IMEI profile is not used or valid unless it is associated with an IMEI
range and this association is specified in an operator policy (see the Operator Policy Configuration Mode Commands
chapter elsewhere in the Command Line Interface Reference).
Essentially, an IMEI profile is a template which groups a set of device-specific commands that may be applicable to one
or more IMEIs. The same IMEI profile can be associated with multiple IMEI ranges and multiple operator policies.
or more IMEIs. The same IMEI profile can be associated with multiple IMEI ranges and multiple operator policies.
An SGSN supports a total of 1000 IMEI profile configurations.
Mode
Exec > Global Configuration > IMEI Profile Configuration
configure > imei-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-imei-profile-profile_name)#
Important:
The commands or keywords/variables that are available are dependent on platform type, product
version, and installed license(s).