Cisco Cisco Packet Data Interworking Function (PDIF)
IMS Authorization Service Configuration Mode Commands
▀ signaling-flow
▄ Command Line Interface Reference, StarOS Release 17
6504
signaling-flow
This command specifies the packet filters and policy servers for bandwidth control and singling context enforcement
that define the traffic that is allowed through the dedicated signaling context.
that define the traffic that is allowed through the dedicated signaling context.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IMS Authorization Service Configuration
configure > context context_name > ims-auth-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-imsa-service)#
Syntax
signaling-flow permit server-address ipv4/ipv6_address [ server-port { port_num | range
start_port to end_port } ] [ description STRING ]
start_port to end_port } ] [ description STRING ]
no signaling-flow permit server-address ipv4/ipv6_address [ server-port { port_num |
range start_port to end_port } ]
range start_port to end_port } ]
no
Disables the signaling flow option configured with this command.
server-address ipv4/ipv6_address
The server address refers to the destination IP address in uplink packets, and the source IP address in
downlink packets.
downlink packets.
ipv4/ipv6_address
is an IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation
and can be used with a subnet mask.
A maximum of 16 signaling server addresses can be configured per IMS Authorization service.
A maximum of 16 signaling server addresses can be configured per IMS Authorization service.
server-port { port_num | range start_port to end_port }
Specifies the TCP/UDP port number(s) of the server to be used for communication.
port_num
must be an integer from 1 through 65535.
range start_port to end_port
provides the option to configure the range of ports on server for
communication.
start_port
must be an integer from 1 through 65535 but lesser than
end_port
, and
end_port
must be an
integer from 1 through 65535 but greater than
start_port
.
description STRING
Specifies the customized description for configured signaling server as an alphanumeric string of 1 through
63 characters.
63 characters.