Cisco Cisco Packet Data Interworking Function (PDIF)
IMS Sh Service Configuration Mode Commands
▀ diameter
▄ Command Line Interface Reference, StarOS Release 17
6510
diameter
This command configures Diameter parameters.
Product
PDIF
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > IMS Sh Interface Configuration
configure > context context_name > ims-sh-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ims-sh-service)#
Syntax
diameter { dictionary { custom1 | standard | endpoint string }
default diameter { dictionary | endpoint }
no diameter endpoint
no
Removes previously configured endpoint.
default
Configures parameters to the default value.
dictionary
Specifies the dictionary to use.
custom1
: A custom dictionary
standard
: The standard dictionary
Important:
SCM uses only the standard dictionary.
endpoint string
Selects an endpoint to use in the configuration.
string
must be the endpoint name, and must be an alpha and/or numeric string of 1 through 63 characters in
length.
Usage
The Diameter endpoint contains information on the peer names and IP addresses and port, and the local IP
address to use for Diameter.
address to use for Diameter.