Cisco Cisco Packet Data Interworking Function (PDIF)
IPMS Client Configuration Mode Commands
heartbeat ▀
Command Line Interface Reference, StarOS Release 17 ▄
6535
heartbeat
Configures the IPMS heartbeating between the IPMS-enabled AGW and the IPMS server.
Product
IPMS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPMS Configuration
configure > context context_name > ipms
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-ipms)#
Syntax
heartbeat period dur [ permitted-failureno_of_failures ]
[ no | default ] heartbeat
default
Configures the heartbeat period and permitted number of failures to the default values of 10 seconds and 1
failure respectively.
failure respectively.
no
Disables/removes the configured heartbeat period and permitted number of failures.
period
dur
Specifies the periodicity (in seconds) between heartbeat messages as an integer from 1 through 3600. Default:
10
10
permitted-failure
no_of_failures
Specifies the number of errors/failures allowed before declaring an IPMS server as dead/unreachable as an
integer from 1 through 10. Default: 1
integer from 1 through 10. Default: 1
Usage
Use this command to configure the heartbeat message periodicity and permissible failure of heartbeat
message response before declaring an IPMS server as dead or unreachable. When an IPMS server is declared
down an SNMP trap is sent.
message response before declaring an IPMS server as dead or unreachable. When an IPMS server is declared
down an SNMP trap is sent.
Example
Following command configures the heartbeat message periodicity to
5
second and number of failures allowed
as
3
to determine an IPMS server as dead.
heartbeat period 5 permitted-failure 3