Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Rulebase Configuration Mode Commands
cca radius charging context ▀
Command Line Interface Reference, StarOS Release 17 ▄
657
cca radius charging context
This command allows you to specify the RADIUS servers used for the current rulebase when RADIUS credit control is
enabled.
enabled.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
cca radius charging context vpn_context [ group server_group_name ]
no cca radius charging context
no
RADIUS credit control will not be performed.
vpn_context
Specifies the charging context where RADIUS prepaid charging parameters are configured.
vpn_context
must be an alphanumeric string of 1 through 79 characters.
group server_group_name
Specifies the RADIUS server group.
server_group_name
must be the name of a RADIUS server group, and must be an alphanumeric string of 1
through 63 characters.
Usage
Use this command to specify the RADIUS charging context where RADIUS prepaid charging parameters are
configured. The same parameters are applicable for RADIUS server group.
configured. The same parameters are applicable for RADIUS server group.
Example
The following command defines RADIUS charging context
prepaid_rad1
for RADIUS prepaid charging
in the rulebase:
cca radius charging context prepaid_rad1