Cisco Cisco Packet Data Interworking Function (PDIF)
LMA Service Configuration Mode Commands
timestamp-replay-protection ▀
Command Line Interface Reference, StarOS Release 17 ▄
6879
timestamp-replay-protection
Designates timestamp replay protection scheme as per RFC 4285.
Product
P-GW
SAEGW
Privilege
Administrator
Syntax
timestamp-replay-protection tolerance seconds
{ default | no } timestamp-replay-protection tolerance
default
Resets the command value to the default setting of 7.
no
Disables the timestamp replay protection feature.
tolerance seconds
Default: 7
Defines the acceptable difference in timing (between timestamps) before rejecting packet, in seconds.
Defines the acceptable difference in timing (between timestamps) before rejecting packet, in seconds.
seconds
must be an integer value between 0 and 65535.
Usage
Use this command to define the acceptable difference in timing (between timestamps) before rejecting
packet.
packet.
Example
The following command sets the acceptable difference for timestamps to 10 seconds:
timestamp-replay-protection tolerance 10