Cisco Cisco Packet Data Interworking Function (PDIF)
LNS Service Configuration Mode Commands
ip source-violation ▀
Command Line Interface Reference, StarOS Release 17 ▄
6893
ip source-violation
This command configures settings related to IP source-violation detection.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > LNS Service Configuration
configure > context context_name > lns-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-lns-service)#
Syntax
ip source-violation { clear-on-valid-packet | drop-limit num | period secs | reneg-limit
num }
num }
no ip source-violation clear-on-valid-packet
clear-on-valid-packet
Default: disabled
Configures the service to reset the reneg-limit and drop-limit counters after receipt of a properly addressed
packet.
Configures the service to reset the reneg-limit and drop-limit counters after receipt of a properly addressed
packet.
drop-limit
num
Default: 10
Sets the number of allowed source violations within a detection period before forcing a call disconnect. If
Sets the number of allowed source violations within a detection period before forcing a call disconnect. If
num
is not specified, the value is set to the default.
num
can be an integer from 1 through 1000000.
period
secs
Default: 120
The length of time (in seconds) for a source violation detection period to last. drop-limit and reneg-limit
counters are decremented each time this value is reached.
The counters are decremented in this manner: reneg-limit counter is reduced by one (1) each time the period
value is reached until the counter is zero (0); drop-limit counter is halved each time the period value is
reached until the counter is zero (0). If
The length of time (in seconds) for a source violation detection period to last. drop-limit and reneg-limit
counters are decremented each time this value is reached.
The counters are decremented in this manner: reneg-limit counter is reduced by one (1) each time the period
value is reached until the counter is zero (0); drop-limit counter is halved each time the period value is
reached until the counter is zero (0). If
secs
is not specified, the value is set to the default.
secs
can be an integer from 1 through 1000000.
reneg-limit
num
Default: 5
Sets the number of allowed source violations within a detection period before forcing a PPP renegotiation. If
Sets the number of allowed source violations within a detection period before forcing a PPP renegotiation. If
num
is not specified, the value is set to the default.