Cisco Cisco Packet Data Interworking Function (PDIF)
LTE Handover Restriction List Configuration Mode Commands
▀ forbidden
▄ Command Line Interface Reference, StarOS Release 17
7012
forbidden
Configures the handover restriction lists provided to eNodeBs where handover restrictions are enforced for UEs.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE HO Restriction List Configuration
configure > lte-policy > ho-restrict-list list_name
Entering the above command sequence results in the following prompt:
[local]host_name(ho-restrict-list)#
Syntax
[ no ] forbidden { inter-rat { all | cdma2000 | geran | utran } | location-area plmnid id
| tracking-area plmnid id }
| tracking-area plmnid id }
default forbidden inter-rat
default forbidden inter-rat
Removes the forbidden inter-RAT configuration from the LTE policy.
no
Removes the forbidden configuration from the LTE policy.
inter-rat { all | cdma2000 | geran | utran }
Specifies that one or all Radio Access Technology (RAT) handovers are to be prohibited for UEs associated
with the LTE policy.
with the LTE policy.
all
: Specifies that all inter-RAT handovers are to be prohibited for UEs associated with the LTE policy.
cdma2000
: Specifies that all CDMA2000 handovers are to be prohibited for UEs associated with the LTE
policy.
geran
: Specifies that all GSM EDGE Radio Access Network (GERAN) handovers are to be prohibited for
UEs associated with the LTE policy.
utran
: Specifies that all UMTS Terrestrial Radio Access Network (UTRAN) handovers are to be prohibited
for UEs associated with the LTE policy.
location-area plmnid id
Specifies that handovers to 3G location area codes defined through this keyword and subsequent
configuration mode are to be prohibited for UEs associated with the LTE policy. Enters the LTE Forbidden
Location Area Configuration Mode.
configuration mode are to be prohibited for UEs associated with the LTE policy. Enters the LTE Forbidden
Location Area Configuration Mode.
id
must be a valid PLMN ID expressed as an integer comprised of an
MCC (Mobile Country Code) and MNC (Mobile Network Code) [five-digit minimum, six-digit maximum].
Important:
Up to 16 forbidden location area PLMN IDs can be configured per handover restriction list.