Cisco Cisco Packet Data Interworking Function (PDIF)
LTE HeNBGW MME Pool Configuration Mode Commands
▀ mme
▄ Command Line Interface Reference, StarOS Release 17
7018
mme
Configures a specific MME to HeNBGW.
Product
HeNB-GW
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > HeNBGW MME Pool Configuration
configure > lte-policy > henbgw mme-pool mme_pool_name
Entering the above command sequence results in the following prompt:
[local]host_name(mme-pool)#
Syntax
[ no ] mme mme_name { ipv4-address ipv4_address [ ipv4-address ipv4_address ] | ipv6-
address ipv6_address [ ipv6-address ipv6_address] [ sctp port port_val ] }
address ipv6_address [ ipv6-address ipv6_address] [ sctp port port_val ] }
no
Removes the configured MME to HeNBGW.
mme_name
It is the MMe name, a string of size 1 through 63.
ipv4-address ipv4_address
Specifies the remote SCTP IP Address for S1 assocation to MME. This must be followed by
ipv4_address
,
the IPv4 address using dotted-decimal notation.
ipv6-address ipv6_address
Specifies the remote SCTP IP Address for S1 assocation to MME. This must be followed by
ipv6_address
,
the IPv6 address using ( : / :: ).
sctp
Configure the S1-MME SCTP parameters.
port
port_val
Designates SCTP port.
port_val
is an integer ranging from 1 through 65535.
Usage
Use this command to configure a specific MME to HeNBGW.
Example