Cisco Cisco Packet Data Interworking Function (PDIF)
LTE TAI Management Object Configuration Mode Commands
sgw-address-resolution-mode ▀
Command Line Interface Reference, StarOS Release 17 ▄
7103
sgw-address-resolution-mode
This command specifies the address resolution mode of the SGW address(s) configured in this object. This command is
applicable only for S4-SGSN.
applicable only for S4-SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE TAI Management Database Configuration > LTE TAI
Management Object Configuration
Management Object Configuration
configure > lte-policy > tai-mgmt-db db_name > tai-mgmt-obj obj_name
Entering the above command sequence results in the following prompt:
[local]host_name(tai-mgmt-obj)#
Syntax
sgw-address-resolution-mode { fallback-for-dns | local }
default
Resets the configuration to the default value, that is
fallback-for-dns
.
fallback-for-dns
Instructs the system to try DNS resolution. If the DNS query fails, the SGSN will use locally configured
addresses. The S4-SGSN will use locally configured SGW address on DNS failure
Default: enabled
addresses. The S4-SGSN will use locally configured SGW address on DNS failure
Default: enabled
local
Instructs the system to only use locally configured S-GW addresses and not to use DNS query.
Default: disabled
Default: disabled
Usage
Use this command to specify the DNS query or local address resolution for this LTE TAI Management
Object. The addresses will be valid only for lac and rac defined under tai-mgmt-object.
Object. The addresses will be valid only for lac and rac defined under tai-mgmt-object.
Example
The following command sets the address resolution mode to use local addresses only if the DNS query fails:
sgw-address-resolution-mode fallback-for-dns