Cisco Cisco Packet Data Interworking Function (PDIF)
Command Line Interface Reference, StarOS Release 17 ▄
7183
Chapter 223
MME Service Configuration Mode Commands
The MME Service Configuration Mode is used to create and manage the LTE Mobility Management Entity (MME)
services for the LTE/SAE network. This service works in conjunction with MME-HSS Service and eGTP Service.
services for the LTE/SAE network. This service works in conjunction with MME-HSS Service and eGTP Service.
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Important:
The commands or keywords/variables that are available are dependent on platform type, product
version, and installed license(s).
Caution:
Restarting the MME service leads to termination of UE sessions at the MME, purge of subscriber data
and closure of all connections towards peer nodes such as eNodeB, HSS, S-GW, etc. It may also lead to termination of
other services associated with the MME. It is strongly advised to make any configuration changes that restarts the
service only while in maintenance mode or at startup.
other services associated with the MME. It is strongly advised to make any configuration changes that restarts the
service only while in maintenance mode or at startup.