Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
local-cause-code-mapping newcall-policy-restrict ▀
Command Line Interface Reference, StarOS Release 17 ▄
7237
local-cause-code-mapping newcall-policy-restrict
Configures the EPS Mobility Management (EMM) reject cause code to send to a UE when a UE requests access but the
call control profile has set the call disposition to reject.
call control profile has set the call disposition to reject.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
local-cause-code-mapping newcall-policy-restrict emm-cause-code { congestion | eps-
service-not-allowed-in-this-plmn | network-failure | no-suitable-cell-in-tracking-area |
plmn-not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed
}
service-not-allowed-in-this-plmn | network-failure | no-suitable-cell-in-tracking-area |
plmn-not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed
}
default local-cause-code-mapping newcall-policy-restrict
default local-cause-code-mapping newcall-policy-restrict
Returns the cause code mapping to its default value:
congestion
.
newcall-policy-restrict emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a UE requests access but the call
control profile has set the call disposition to reject.
control profile has set the call disposition to reject.
emm_cause_code
must be one of the following options:
congestion
- Default.
eps-service-not-allowed-in-this-plmn
network-failure
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when a UE procedure fails, such as when the
UE requests access to a restricted zone. By default, the MME sends the UE the #22 - Congestion cause code
when encountering this condtion.
UE requests access to a restricted zone. By default, the MME sends the UE the #22 - Congestion cause code
when encountering this condtion.