Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
local-cause-code-mapping sgw-selection-failure ▀
Command Line Interface Reference, StarOS Release 17 ▄
7247
local-cause-code-mapping sgw-selection-failure
Configures the reject cause code to send to a UE when a failure occurs during S-GW selection.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
local-cause-code-mapping sgw-selection-failure emm-cause-code { eps-service-not-allowed-
in-this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
in-this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
default local-cause-code-mapping sgw-selection-failure
default local-cause-code-mapping sgw-selection-failure
Returns the cause code mapping to its default value:
network-failure
.
sgw-selection-failure emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed }
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when a failure occurs during S-GW
selection.
selection.
eps-service-not-allowed-in-this-plmn
network-failure
- Default
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when a failure occurs during S-GW
selection. By default, the MME sends the UE the #17 - Network failure cause code when encountering this
condition.
selection. By default, the MME sends the UE the #17 - Network failure cause code when encountering this
condition.