Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
msc-mapping ▀
Command Line Interface Reference, StarOS Release 17 ▄
7263
msc-mapping
This command creates a mapping between the MSC ISDN number and the MSC’s IP-address (either IPv4 or IPv6) to
ensure location continuity for SRVCC handover. This mapping is required to include the MSV ID in the target service
node IE for the Emergency_Call_Handover event.
ensure location continuity for SRVCC handover. This mapping is required to include the MSV ID in the target service
node IE for the Emergency_Call_Handover event.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
msc-mapping ip-address { ipv4_address | ipv6_address } isdn isdn_number
msc-mapping ip-address { ipv4_address | ipv6_address
no
Removes a specific MSC IP address mapping definition from the MME Service configuration.
ip-address
ipv4_address | ipv6_address
Specifies the IP address for the MSC as an IPv4 dotted-decimal or as an
IPv6 colon-separated-hexadecimal notation.
isdn
isdn_number
: Enter a numeric string upto 15 digits long.
Usage
The MME Service supports a maximum of 24 MSC IP address to ISDN mapping definitions.
Use the
Use the
show mme-service
command to see the MSC IP address to ISDN mappings created with this
command.
Example
Map the IPv4
192.168.61.2
address of the MSC to ISDN
123456789012345
msc-mapping ip-address 192.168.61.2 isdn 123456789012345