Cisco Cisco Packet Data Interworking Function (PDIF)
MME SGs Service Configuration Mode Commands
▀ associate
▄ Command Line Interface Reference, StarOS Release 17
7312
associate
Associates or disassociates a Stream Control Transmission Protocol (SCTP) parameter template with the SGs service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME SGs Service Configuration
configure > context context_name > sgs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgs-service)#
Syntax
associate sctp-param-template template_name
no associate sctp-param-template
no
Removes the SCTP parameter template association.
template_name
Associates an SCTP parameter template with the SGs service.
template_name
specifies the name for a pre-configured SCTP parameter template to associate with this
SGs service as an alphanumeric string of 1 through 63 characters. For more information on the SCTP
parameter template, refer to the sctp-param-template command in the Global Configuration Mode
Commands chapter and the SCTP Parameter Template Configuration Mode Commands chapter.
parameter template, refer to the sctp-param-template command in the Global Configuration Mode
Commands chapter and the SCTP Parameter Template Configuration Mode Commands chapter.
Usage
Use this command to associate a pre-configured SCTP parameter template with the SGs service.
Caution:
This is a critical configuration. Any change to this configuration will cause the SGs service to restart.
Important:
If no SCTP parameter template is specified, all default settings for the configurable parameters in the
SCTP Parameter Template Configuration Mode apply.
Example
The following command associates a pre-configured SCTP parameter template called
sctp-3
to the SGs
service:
associate sctp-param-template sctp-3