Cisco Cisco Packet Data Interworking Function (PDIF)
MRME Service Configuration Mode Commands
▀ bind
▄ Command Line Interface Reference, StarOS Release 17
7346
bind
This command allows you to configure an IPv4 address to be used as the connection point for establishing SaMOG
sessions to handle authentication and accounting messages.
sessions to handle authentication and accounting messages.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > MRME Service Configuration
configure > context context_name > mrme-service
mrme_service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mrme-service)#
Syntax
bind address ipv4_address [ auth-port auth_port_number ] [ acct-port acct_port_number ] [
max-subscribers max_subscriber_number ]
max-subscribers max_subscriber_number ]
no bind
no
Removes a previously configured binding.
address ipv4_address
Specifies the IP address of an interface to be used as the connection point for establishing SaMOG sessions.
ipv4_address
must be an IPv4 address expressed in dotted-decimal notation.
Important:
To define more than one NAS IP address per context, in Global Configuration Mode, use the
aaa
large-configuration
command.
auth-port auth_port_number
Specifies the authentication port number of the interface where authentication requests are received. The
system binds the default authentication port to 1812.
In addition to the authentication port, the accounting port and maximum subscriber limit can also be
configured optionally.
system binds the default authentication port to 1812.
In addition to the authentication port, the accounting port and maximum subscriber limit can also be
configured optionally.
auth_port_number
must be an integer from 1 through 65535.
acct-port acct_port_number
Specified the accounting port number of the interface where accounting requests are received. The system
binds the default accounting port to 1813.
In addition to the accounting port, the maximum subscriber limit can also be configured optionally.
binds the default accounting port to 1813.
In addition to the accounting port, the maximum subscriber limit can also be configured optionally.
acct_port_number
must be an integer from 1 through 65535.