Cisco Cisco Packet Data Interworking Function (PDIF)
PCC-Action-Set Configuration Mode Commands
online-charging-server ▀
Command Line Interface Reference, StarOS Release 17 ▄
7543
online-charging-server
This command sets the action to change the online charging server applicable to an IP-CAN session under PCC-Action-
Set configuration instance for PCC-Service configuration.
Set configuration instance for PCC-Service configuration.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Action-Set Configuration
configure > context context_name > pcc-service service_name > action-set action_set_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-action-set)#
Syntax
[no] online-charging-server primary pri_serv_address [secondary sec_serv_address]
no
Removes the action set to change the online charging server under PCC-Action-Set configuration instance for
PCC-Service configuration.
PCC-Service configuration.
primary
pri_serv_address
Identifies the name of the primary online charging server which is to be used for action to change under PCC-
Action-Set configuration instance for PCC-Service configuration.
The
Action-Set configuration instance for PCC-Service configuration.
The
pri_serv_address
must be the address of an online charging server in Diameter URI format (
FQDN
[
port
] [
transport
] [
protocol
]).
secondary
sec_serv_address
Identifies the name of the secondary online charging server which is to be used for action to change under
PCC-Action-Set configuration instance for PCC-Service configuration.
The
PCC-Action-Set configuration instance for PCC-Service configuration.
The
sec_serv_address
must be the address of an online charging server in Diameter URI format (
FQDN
[
port
] [
transport
] [
protocol
]).
Usage
Use this command to set an action to change the online charging server applicable to an IP-CAN session
under PCC-Action-Set configuration instance for PCC-Service configuration.
under PCC-Action-Set configuration instance for PCC-Service configuration.
Example
Following command configures an action change the online charging server to primary server
aaa://host.abc.com:6666;transport=tcp;protocol=diameter
and secondary server
aaa://host.xyz.com:6666;transport=sctp;protocol=radius
under PCC-Action-Set
configuration instance for PCC-Service configuration: