Cisco Cisco Packet Data Interworking Function (PDIF)
PCC-Usage-Monitor Configuration Mode Commands
▀ usage-limit time
▄ Command Line Interface Reference, StarOS Release 17
7768
usage-limit time
Sets the usage limit by time for a subscriber profile for a PCC-Service-Profile on an IPCF node.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Service Profile
Configuration > PCC Usage-Monitor Configuration
Configuration > PCC Usage-Monitor Configuration
configure > context context_name > pcc-service service_name > profile profile_name >
usage-monitor usage_monitor_name
usage-monitor usage_monitor_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-profile-usage-mon)#
Syntax
[ default ] usage-limit time time_dur
default
Sets the usage limit time to 10 seconds for IP-CAN traffic in a PCC-Service-Profile.
time
time_dur
Default: 10 secs.
Specifies the usage duration (in seconds) for a PCC-service profile instance.
Specifies the usage duration (in seconds) for a PCC-service profile instance.
time_dur
must be an integer from 1 through 4294967296.
Usage
Use this command to set the usage limit in duration for subscriber profile for a PCC-Service-Profile on IPCF
node.
node.
Example
The following command sets the usage duration limit to 20000 seconds within a PCC-Service-Profile.
usage-limit time 20000