Cisco Cisco Packet Data Interworking Function (PDIF)
PDSN Service Configuration Mode Commands
▀ retransmission-timeout
▄ Command Line Interface Reference, StarOS Release 17
7892
retransmission-timeout
Configures the maximum allowable time for the PDSN service to wait for a response from the PCF before it a) attempts
to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the PCF as unreachable.
to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the PCF as unreachable.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
retransmission-timeout time
[ default | no ] retransmission-timeout
no
Enables/Disables the
retransmission-timeout
.
default
Sets / Restores default value assigned for
retransmission-timeout
.
time
Specifies the maximum allowable time for the PDSN service to wait for a response from the PCF before it a)
attempts to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the
PCF as unreachable.
time is measured in seconds and can be configured to any integer value between 1 and 1,000,000.
attempts to communicate with the PCF again (if the system is configured to retry the PCF) or b) marks the
PCF as unreachable.
time is measured in seconds and can be configured to any integer value between 1 and 1,000,000.
Usage
Use the retransmission timeout command in conjunction with the
max-retransmissions
command in
order to configure the PDSN services behavior when it does not receive a response from a particular PCF.
Use the
Use the
no
retransmission-timeout
command to delete a previously configured timeout value. If after
deleting the lifetime setting you desire to return the lifetime parameter to its default setting, use the
default
retransmission-timeout
command.
The chassis is shipped from the factory with the retransmission timeout set to 3 seconds.
Example
The following command configures a retransmission timeout value of
5
seconds:
retransmission-timeout 5
The following command deletes a previously configured retransmission-timeout setting: